Future Design MCTB 4.3, Руководство пользователя

Страница: 148 / 240

MCTB
148
8.5.1 More About FTP, FileWeb and DataWeb Interfaces
FTP servers (File Transfer Protocol) have been around for many years and can be installed on local or network
machines. The FTP server allows a client (MCTB) to transfer files to the FTP server once installed. This allows
for manual and automatic backup of data from the MCTB.
MCTB Field Setup FTP Server Setup
Type = FTP
FTP server setup for passive operation (see Appendix section
A.2 FTP, FileWeb, DataWeb Requirements/Installation for
additional information).
IP Add = xxx.xxx.xxx.xxx Actual IP address of FTP server
User = userName Actual user name for login if authentication used.
Password = userPassword Actual password for login if authentication used.
Server = myFTP
FTP server setup with a root directory named “myFTP”. The
FTP server directory path must exist and match the MCTB
setup for proper operation. If there is an additional directory
within the “myFTP” root directory, its name would be appended
to the path. (i.e.,
myFTP/Files if a “Files” directory inside the
myFTP server root directory is the target for transfer).
Port = 21 Port used at MCTB and open at FTP server.
NOTE: Make sure proper permissions are set at the FTP server for access/creation of directories and
read/write access. Also check root directory structure at Server to identify the actual root that was
created for the files since there can be additional layers created by the server and displayed in the path.
The FileWeb interface allows the MCTB to transfer its files to a web site for download which can then be viewed
using a standard web browser. This interface provides the user the ability to setup a web site to store files for
local or global access without installing an FTP server. The MCTB supports https:// (secure) transfer of files.
MCTB Field Setup FileWeb Server Setup
Type = FileWeb
FileWeb server setup (see Appendix section A.2 FTP, FileWeb,
DataWeb Requirements/Installation for additional information).
IP Add =
https://fdctuil.com/FDDataService.svc
Actual named address of FileWeb server/service.
User = userName Actual user name for login at FileWeb server (required).
Password = userPassword Actual password for login at FileWeb server (required).
Server = optional path
The FileWeb server/service must be configured with a root
“\files\” directory in order to use the MCTB FileWeb feature.
The MCTB
is hard coded to transfer files to the “files” directory
in the root of the server. If the Server field also contains an
entry (i.e., optionalPath), the resulting path would be
“\files\
optionalPath \
”. If the directory does not exist, it will be
created at the server by the MCTB based on the permissions
settings at the server.
Port = not used