Future Design MCTB 4.3, Руководство пользователя

Страница: 127 / 240

MCTB
127
6.2 Starting an Automatic Ramp/Soak Program
All automated program operating functions are accessed via the Program Operation screen. This screen can
be acce
ssed by pressing the “Program Operation” button on the Loop view or Overview screens or by pressing
the “Run” button on the program Entry screen.
The program operation allows an operator to run, hold, stop, edit and select automatic programs. The Program
operation window will display the program loaded in the MCTB which is ready for operation by pressing the
Run, Hold or Stop buttons. If a program is already loaded, the user can start the program without entering a
start step. This offers a quick start/stop of programs for repetitive test operations. In this case, the program
will always start from step 1.
If entering a Start Step is required (to start the program on a specific step), press the
“Select” button and choose
the program from the list, then press the run button. This will display the Start Step entry.
The
start step can be adjusted up and down by pressing the right/left arrow buttons or by pressing the step
number field and directly entering the desired start step via the numeric keypad. Once the desired start step
number is entered, press the
“Start” button. The program will then be transferred to the loop control(s) and
started once the transfer is complete.
To stop
a program, select
“Stop” from the Program Operation window. When a program is stopped, the loop
set points and events will revert back to the single set point (static mode) values that were entered prior to the
program being started. The Edit button will navigate directly to the program Entry screen so a program can be
created, edited and stored.