Future Design MCTB 4.3, Руководство пользователя

Страница: 126 / 240

MCTB
126
To program a jump step, select jump for the step type and enter the step number that you want the program to
jump back to along with the total number of times the jump is to be made (by pressing each row in the list). A
cycle count of one indicates that no jump will be made since one cycle is completed upon reaching the jump
step.
6.1.7
Setting the End Step
All programs require that the last step is entered as an
“End” step type regardless of the length (2 to 64 steps)
of the program. The end step type provides a cycle count entry which makes it easy for the operator to repeat
an entire program without having to enter a jump step. The end step cycle count can be set from 1 to 9999
cycles. An entry of 10,000 can also be made which signifies infinite looping, i.e., the program will keep repeating
itself until manually stopped by the user. Press each row in the list to make the desired entry.
If the loop controls are configured for “Final setpoint of automatic program” at end of program operation, the
loop set point for each loop also will be displayed in the list. When the program ends, the set point entered on
the end step will be used as the loop set point.
The MCTB configuration also provides the options for having the loop controls maintain their current set point
of the last step or return to the static mode of operation when the program is completed. When configured to
maintain the set point of the last step, the loop set points will maintain their current value. When configured to
use the last control set point, the loop controls will automatically return to the previous static set point (prior to
the start of the program) when the program ends. If there are questions or concerns about the configuration
and operation of your MCTB controller, contact your OEM for further information. Only your OEM can address
equipment related issues.