Future Design MCT-CM, Руководство пользователя

Страница: 176 / 247

MCT-CM
176
The
Alarm Volume adjusts how loud the internal alarm buzzer of the MCT will be when activated under an
alarm condition. The volume can be set from 0 (off) to 100. To edit the alarm volume, touch the entry field and
enter the desired volume level. To test the buzzer, press the “Alarm Test” button.
10.12.1 Calibrate Touch
After extended use and many hours of operation, it may be necessary to recalibrate the touch screen of the
MCT. A typical sign that the screen may be out of adjustment, is inaccurate responses when attempting to
press buttons, check boxes or adjust fields on the display. The calibration utility is provided in order to re-adjust
the screen when this happens.
To begin the calibration process, press the
“Calibrate Touch” button. An alert message will appear stating that
the application will be disabled to perform the calibration procedure. Press
“Yes” to continue.
The calibration utility will start and crosshairs will appear on the screen. At each crosshair position, touch the
screen at the center of the crosshairs. Repeat this for each position in order to set the calibration. The
calibration requires five points, the center and four corners.
NOTE: It is recommended that you use your finger rather than a stylus when calibrating the screen. The
touch response will be more fluid after calibrating it with your finger.