Future Design MCT-CM, Руководство пользователя

Страница: 161 / 247

MCT-CM
161
10.2 Degrees C/F Units Selection
The MCT can display temperatures in either degrees Centigrade or Fahrenheit. To change the temperature
display units, select
“Units” from the offline Set menu.
Press the button for the desired temperature units to make the selection. The choices are mutually exclusive
so when one selection is made, the other will be de-selected.
NOTE: When changing display units, ramp/soak program set points will not be converted between units.
Separate programs are required for each temperature range. Operating the MCT with programs that
have been written using alternate units could cause property damage or personal injury.
The temperature units selection only effects control loops and monitor inputs configured as
temperature, i.e., controllers or monitor input cards with a temperature input device such as a
thermocouple or RTD. The units display for loop controls and monitor input cards configured with
linear inputs (mA or Vdc) will not be affected by this selection.
10.3 Clock Settings
The system date and time is adjusted from the
“Adjust Time” tab under the Set/Clock menu. The current date
and time will be displayed in the thumb wheels as shown below.
To make adjustments, scroll each time wheel to adjust the month, day, year, hour, minutes, seconds and
AM/PM selection. Once all adjustments have been made, press the
“Save” button to set the system clock to
the date and time entered.