Page 4 of 5 // email [email protected] US tel +1(603) 742 9181 Europe tel +44 (0) 1438 833577
IR & RS232 Commands
RS232 commands are all terminated with carriage return but no line feed. In Crestron this is
represented by \r
IR sequences involving multiple key-presses require each successive key to be pressed within 2
seconds
User Control
IR
RS232
Action
Comments
IN
fa_in
System fully in
HOME
Moves to telescope
extended, swivel
centred position
Swivel moves to centre if
already rotated
OUT
Similar to HOME
but swivel will not
move
Swivel will not move
PRESET
fa_preset
Moves to telescope
extended, swivel at
intermediate
viewing angle
“PRESET”
A
fa_a
Moves to telescope
extended, swivel at
intermediate
viewing angle “A”
B
fa_b
Moves to telescope
extended, swivel at
intermediate
viewing angle “B”
C
fa_c
Moves to telescope
extended, swivel at
intermediate
viewing angle “C”
<
fa_left
Moves to telescope
extended, swivel at
maximum left
Maximum angle achievable
relative to the current maximum
arm out setting
>
fa_right
Moves to telescope
extended, swivel at
maximum right
Maximum angle achievable
relative to the current maximum
arm out setting
STOP
fa_stop
Stop mechanism