1 7
1 7
1 7
1 7
1 7
Assembly
E.S.C. MC210CB Adjustment
*Use the accessory mini screwdriver to make adjust-
ments.
Preparation
1
Set the transmitter servo reversing switch to the
normal position.
2
Turn the high point trim fully clockwise.
Neutral Adjustment
1
Have the throttle trigger at neutral.
2
Set the neutral trim to the point where the monitor
lamp goes off.
- The point where the monitor lamp changes from a rapidly flashing light
to off is the neutral point.
High Point Adjustment
1
Set the throttle trigger to just a little before full
throttle.
2
Set the high point trim to the point where the
monitor lamp is a steady light.
- The point where the monitor lamp changes from a rapidly flashing to a
steady light is full throttle.
Monitor Lamp
Neutral Point
High Point
Reverse
Forward
Slow Flashing Off Rapidly Flashing Steady Light
MC210CB
Fully Clockwise
MC210CB
Point at which monitor
lamp goes off.
MC210CB
Point where the monitor
lamp is a steady light.
