background image

3

3

3

3

3

Safety Precautions

Running (Sailing) Safety Precautions

Warning

Conduct Tests

Prior to operation always preform a range test.
Even one abnormality in the R/C system may cause loss of control.
[Range Test Procedure]
Have a friend hold the model, or place on a stand where the wheels or prop can not
come in contact with any object. Collapse the transmitter antenna and operate from a
distance of about 10 yards. Be sure to check the movement of each servo to make
sure they follow the movement of the steering wheel and throttle trigger. If the servos
do not follow the commands from the transmitter or any type of interference is de-
tected, Do Not operate the model.

Fully extend the transmitter antenna.
If the transmitter antenna is not fully extended range will be reduced and control may
be lost.

Prohibited

Do not operate two or more models on the same frequency at the same time.
Operation of two or more models on the same frequency at the same time will cause
interference and loss of control of both models.
AM, FM and PCM are different methods of modulation. Nonetheless the same fre-
quency can not be used at the same point in time, regardless of the signal format.

Do not operate outdoors on rainy days

Never operate in the rain or run through puddles.
The transmitter, receiver, batteries and most servos, and speed controls are not wa-
terproof. Contact with any type of moisture or immersion in water or snow will cause
damage along with possible loss of control. Should any type of moisture enter any
component of the system immediately stop using the R/C system and return to our
service center for inspection.

Prohibited

Do not operate when visibility is limited.
Should you loss sight of the model a collision or other dangerous situation may occur.

Prohibited

Do not operate near people or roads.
Do not operate near high tension power lines or communication broadcasting anten-
nas.
Prior to the operation of any model be sure the area you plan to use is safe. Be aware
of all object that may be in the path of your model. Do not operate the model where
people or any type of moveable object could stray in the path of your model. Control
loss due to interference, component failure, loss of sight or low battery voltage could
result in serious injury to yourself and others as well as damage to your model.

Prohibited

Do not Operate your R/C system within 1 mile of another site where radio control
activity may occur.
Interference from other R/C systems will cause loss of control.

Содержание 2PC



















Отзывы: