30
$/22.$77+(5$',26)81&7,21667(3%<67(3
MODEL
submenu:
includes three functions that manage model memory:
MODEL SELECT
,
MODELCOPY
and
MODELNAME
. Since
these functions are all related, and are all basic features used with most models, they are together in the
MODEL
submenu of
the
BASIC
menu.
NOTE: When you choose a new model in the
MODEL SELECT
function, if the new
model is set to a different modulation, you must cycle the transmitter power to change
PRGXODWLRQV,I\RXGRQRWF\FOHWKHSRZHUWKHPRGXODWLRQW\SHZLOOÀDVKRQWKHKRPH
screen to remind you. Please note: You are still transmitting on the other modulation
until you affect this change.
GOAL:
STEPS:
INPUTS:
Select Model #3.
N O T E : T h i s i s o n e o f s e v e r a l
functions for which the radio requires
FRQ¿UPDWLRQWRPDNHDFKDQJH
Open
BASIC
menu, then open
MODEL
submenu.
for 1 second.
(If
ADVANCE
,
again.)
C
if required to
MODEL
.
Choose Model #3.
to
3
.
&RQ¿UP\RXUFKDQJH
for 1 second.
Are you sure?
displays.
Close.
Confirm proper modulation of new
model memory.
If
2.4G
LVÀDVKLQJLQWKHXSSHUULJKWKDQGFRUQHUWKHQWKHQHZPRGHOLVVHWIRU
WKHRWKHUUHFHLYHUW\SH7XUQWKHWUDQVPLWWHURIIRQWRFKDQJHWKHPRGXODWLRQ
Where next?
NAME
the model: see p. 32.
Change
MODEL TYPE
(aircraft, heli, glider): see p. 34.
Change modulation (
2.4G-10CH
or
2.4G-7CH
): see p. 35.
Utilize servo
REVERSE
: see p. 38.
Adjust
END POINTs
: see p. 39.
Set up
IDLE-DOWN
and
THR-CUT
for throttle management: see p. 40, 41.
MODEL SELECT
: This function selects which of the 15 model memories in the
transmitter (or 33 in the optional
CAMPac-
. WR VHW XS RU À\ )RU FODULW\
the model's name and an image of its type are indicated after its number. (Each
model memory may be a different model type from the other memories.)
Note: If you are using the optional
CAMPac-
16K, your choices in
MODEL
SELECT
and
MODEL COPY
will include 16-33, which are the model memories in
the
CAMPac
. You do not have to
COPY
from the
CAMPac
to the transmitter
prior to working with that model.
T9C/T9CS CAMPac data conversion
Although the
CAMPac
GDWD WKDW KDV EHHQ VDYHG DV WKH GDWD RI D FRQYHQWLRQDO 7&7&6
transmitter cannot be used directly, it is possible to use it by the following method. Copying
the information to the model memory of a T10C transmitter. When using the
CAMPac
, the
information will be displayed. For example, as "01<-Pac 01." Press
DIAL
for 1 second in
this state and the check display of "Are you sure?" will appear. Press
DIAL
again, the data of
CAMPac
will be copied to model number"01" of the T10CG transmitter. As for the data of the function added by T10CG,
DQLQLWLDOYDOXHLVVHWXSDWWKLVWLPH3OHDVHGRQRWIRUJHWWRFKHFNWKHVHWWLQJVEHIRUHÀ\LQJ
In addition, refer to p.17 for the initializing method of the
CAMPac
.
T10CG/T10C CAMPac data compatibility
The
CAMPac
data saved from a T10CG or conventional T10C transmitter can be used directly by a T10CG and T10C
transmitter. As for the data of functions added by the T10CG:
(T10C data -> T10CG): an initial value is set up at this time.
(T10CG data -> T10C): the function doesn't work regardless of the data.
ÀDVKLQJ
