FUSHENGTEK Technology WG-7302-E38/J19, Руководство пользователя

Страница: 16 / 60

WG-7302 Page
16
Document Details
WG-7302 User’s Guide
6 IO-Area Connectors
6.1 HDMI Connectors (HDMI1, HDMI2)
The HDMI® interface is available through the standard 19 pin Type A HDMI® connector
Pin Signal Description Type
1 TMDS2+ TMDS data 2 (positive) DSO-3.3
2 GND Ground PWR
3 TMDS2- TMDS data 2 (negative) DSO-3.3
4 TMDS1+ TMDS data 1(positive) DSO-3.3
5 GND Ground PWR
6 TMDS1- TMDS data 1 (negative) DSO-3.3
7 TMDS0+ TMDS data 0 (positive) DSO-3.3
8 GND Ground PWR
9 TMDS0- TMDS data 0 (negative) DSO-3.3
10 TMD CLK+ TMDS clock (positive) DSO-3.3
11 GND Ground PWR
12 TMD CLK- TMDS clock (negative) DSO-3.3
13 N.C. Not connected NC
14 N.C. Not connected NC
15 DDC_CLK DDC clock IO-5.0
16 DDC_DATA DDC data IO-5.0
17 GND Ground PWR
18 VCC5
1)
Power +5V PWR
19 TMDS_HPD Hot plug detect I-5.0
Note:
1)
To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
6.2 Ethernet Connector
The WG-7302 support single channels of 10/100/1000Mb Ethernet based on Realtek® RTL8111E.
In order to achieve the specified performance of the Ethernet port, Category 5 twisted pair cables must be used with
10/100MB and Category 5E, 6 or 6E with 1Gb LAN networks.