Furuno WV-100, Руководство оператора, Страница: 23 / 56

AP-2
APPENDIX 2 ALERT LIST
The following table shows the alerts in this software.
No. Text Meaning Remedy
01 Date and Time data error. No data for the date and time. Check if the date and time
signal is input.
02 GPS data error. No positioning data. Check if the GPS signal is in-
put.
03 Ship speed data error. No speed data. Check if the speed signal is
input.
04 Wind sensor data error. No wind data. Check if the wind signal is in-
put.
05 Radar communication error. Can not connect the radar. Check the network connec-
tion.
06 Pulse width error. The pulse width of the con-
nected radar is more than M2. Set the pulse width from S1 to
M1.
07 INT-SW status error. The interswitch of the con-
nected radar is set to ON. Set the interswitch to OFF.
08 Storage size is full. The capacity for the result file
is full. The space is less than
10 GB. Or, can not recognize
the destination where to save
data. Delete unnecessary data
from the folder to make room.
09 COM Open error. Can not open the COM port
for the serial output. Check the connection of the
COM port.
10 GYRO data error. Gyrocompass data is unavail-
able. Check if the Gyrocompass
data is input.