manualshive.com logo in svg

Furuno TZT19F, Руководство по установке

Поделиться
Скачать
Furuno TZT19F Скачать руководство пользователя страница 42

3.  HOW TO SET UP THE EQUIPMENT

3-10

CZone

[Initial Setup] menu - [Engine & Tank Automatic Setup]

The TZT19F will automatically detect engines and tanks connected to the same net-
work. This is the recommended method for setting up engines and tanks.

[Initial Setup] menu - [Engine & Tank Manual Setup]

The manual set up method should only be used if the automatic setup did not correctly 
detect your engines or tanks.

[Manual Fuel Manage-
ment]

Set to [ON] for manual fuel manage-
ment. See the Operator’s Manual.

[OFF], [ON].

Menu item

Description

[Add Default CZone 
Pages]

Create, edit C-Zone pages.

[CZone DIP Switch 
Settings]

Set this unit’s DIP switches. For the serviceman. Do not change the set-
tings.

Menu item

Description

[Reset Instrument Pag-
es]

Resets all instrument pages to default.

[OK], [Cancel]

[Reset Default Set-
tings]

Resets applicable settings to default.

[OK], [Cancel]

Menu Item

Description

Options (setting range)

[Nickname]

Change the nickname for the engine or tank.

[Used For Propulsion]

Select which engine/tank is used to 
calculate the distance which may be 
traveled using the remaining fuel. [ON] uses 
the engine/tank for calculations, [OFF] 
ignores the engine/tank.

[ON], [OFF]

[Reset] 

Resets the engine/tank details to default.

Menu item

Description

Options (setting range)

Содержание TZT19F



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды