manualshive.com logo in svg

Furuno TZT19F, Руководство по установке

Поделиться
Скачать
Furuno TZT19F Скачать руководство пользователя страница 24

2.  WIRING

2-2

2.2

Composite Connector

The composite connector, at the rear of the unit (See the figure on page 2-1), contains 
connection leads for Video In (two leads), LAN (two leads), HDMI (two leads for 
input and output), NMEA2000, MULTI, USB port and DI-FFAMP.

Analog video input

The TZT19F can use regular analog video inputs (PAL or NTSC) that 
connect to the TZT19F directly via the Video Input 1/2 connectors. Analog video can 
be viewed only on the equipment where the source is connected.

Additionally FLIR cameras may be connected to the TZT19F. Connect the Video Out 
cable from the camera to the Video In (1 or 2) cable on the TZT19F.

Note: 

Some camera models may require an adapter for connection.

Cameras may be set up using the appropriate menu item on the [Camera] menu, 
accessed from the [Settings] menu. For details on camera setup, see the operator’s 
manual (OME-45120-x).

Nerwork1/2

You can connect to an external network device using a LAN cable. Use HUB-101 (op-
tion) when connecting multiple devices. The MCU-005 can be also used by using a 
PoE hub.

Video out (external HDMI monitor)

A HDMI monitor can be connected to the TZT19F to repeat the screen at a remote 
location. The TZT19F is compatible with wide-screen HDMI monitors which meet the 
following minimum requirements:

Video in (HDMI Source Devices)

Video data from HDMI source devices can be watched on TZT19F by connecting the 
device.

CAN bus port

TZT19F can be connected to multiple NavNet TZtouch3 using the CAN bus connector 
(micro type). In that case, connect them all to the same CAN bus backbone cable. See 
section 2.8 for details.

MULTI port

You can connect to external devices such as buzzers and event switches. See 
section 2.5 for details.

USB port

The TZT19F has two USB Ver. 2.0 ports which can be used to connect an optional SD 
card unit or remote control unit, and to be operated from touch device or PC mouse.

Resolution

Vert. Frequency

Horiz. Frequency

Pixel clock

1920 

u

 1080

60 Hz

67.5 kHz

148.5 MHz

Содержание TZT19F



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды