Furuno NAVpilot-300, Руководство оператора, Страница: 77 / 101

6-1
6. MAINTENANCE, TROUBLE-
SHOOTING
This chapter provides procedures for maintenance and troubleshooting.
6.1 Preventive Maintenance
Regular maintenance is necessary for best performance. Create a maintenance
schedule which includes the items shown below.
Item Check point Remedy
Connectors Check for tight connection. Tighten loosened connectors.
Cables Check cables for damage
and corrosion. Replace cables as necessary.
Processor Unit,
Control Unit Dust/dirt on the units. Use soft, dry cloth to clean the units.
For heavy grime, use a cloth moist-
ened with mild detergent to clean the
grime, then wipe the unit dry with a
separate soft, dry cloth. Do not use ac-
etone, benzene or other solvents as
they will damage the unit.
LCD Dust on the LCD dims pic-
ture. Clean the LCD carefully to prevent
damage, with tissue paper and an
LCD cleaner. To remove dirt or salt
deposits, use an LCD cleaner and
wipe slowly with lens paper so as to
dissolve the dirt or salt. Change the
paper frequently so the salt or dirt will
not damage the LCD. Do not use sol-
vents like thinner, acetone or benzine
for cleaning.
NOTICE
D
o not apply paint, anti-corrosive
sealant or contact spray to plastic
parts or equipment coating.
Those items contain products that can
damage plastic parts and equipment
coating.