Furuno NAVpilot-300, Руководство оператора

Страница: 68 / 101

5. GESTURE CONTROLLER GC-001
5-10
5.6.6 How to use the [AUTO OFF] feature
You can set a time, similar to the sleep mode timer, after which your GC-001 will au-
tomatically turn off.
To set the [AUTO OFF] time, follow the procedure below.
1. Open the [SYSTEM MENU].
2. Select [AUTO OFF]. The time settings appear.
3. Select the appropriate time. The available selections are [OFF], [1H] (one hour),
[3H] (three hours) and [6H] (six hours).
The GC-001 turns off after the time set here lapses, when the GC-001 is in sleep
mode. Select [OFF] to disable the [AUTO OFF] feature.
4. Close the menu.
5.7 How to Use the Gesture-To-Turn Feature
The gesture-to-turn feature allows you to remotely turn your vessel, without using the
helm. Before you can use this feature, check the following requirements:
To use the gesture-to-turn follow the procedure below.
Note: Inform your crew and passengers before using the gesture-to-turn feature.
1. Referring to section 2.2 or section 5.9.2, set the system to AUTO mode.
The gesture-to-turn function is not available in other modes.
2. Facing the bow, press and hold .
3. Move the GC-001, in a horizontal arc, in the direction you want to turn. The rudder
is adjusted to turn your vessel in that direction.
• Is the GC-001 and NAVpilot-300 turned on?
Both units must be powered to use this feature.
• Is the gesture-to-turn feature is enabled?
To check this setting, see section 5.6.3.
• Is the GC-001 paired with the system?
If you have only one GC-001, pairing is already completed. For additional GC-001s,
see section 5.8 for the pairing procedure.
Pointed to towards the bow
Starboard turn Port turn