Furuno NAVpilot-300, Руководство оператора, Страница: 25 / 101

2. STEERING MODES
2-5
2.3 NAV Mode
NAVpilot steers the boat towards the current waypoint while compensating for the ef-
fects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the boat to follow a series of
waypoints in sequence. When you arrive at each waypoint or destination, audible and
visual alerts are activated.
The NAVpilot takes approximately 15 seconds to activate the NAV mode after the
NAVpilot receives the destination information.
2.3.1 How to activate NAV mode
To activate NAV mode, follow the procedure below.
1. Set the destination waypoint (or route) on the GPS navigator or chart plotter.
To navigate a route, make sure that your plotter is navigating towards the nearest
or required waypoint before you put the NAVpilot into the NAV mode.
2. Manually steer the boat toward the waypoint.
3. Press . A confirmation window appears.
4. Press , or to select [Economy], [Precision] or AUTO mode, as
appropriate.
• [Economy]: keeps the course within 0.03 NM.
• [Precision]: keeps the course within 0.01 NM.
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
Waypoint Waypoint
Steering a route (a series of waypoints)
Steering to a single waypoint
STBY
1
1
STBY