Furuno GS-100, Руководство оператора

Страница: 40 / 157

3. SETTINGS
3-12
8. Select [3 Sentence].
Note: Ask a serviceman, if [GGA], [GLL], [GNS], [RMC] or [XDR] is grayed out as
shown in the below example.
9. Press the cursorpad to select the sentence then press the ENT key.
10. Press the cursorpad (
W
or
X
) to select the TX interval.
11. Press the ENT key.
12. Set [2 Output Data2], [3 Output Data3] and [4 Output Data4] similarly.
13. Press the
MENU ESC key to close the sentence window.
3.8.2 How to set the sentences to output to the Ethernet
1. Press the MENU ESC key to open the main menu.
2. Select [5 I/O] then [5 Ethernet].
3. Select [1 Sentence].
4. Press the cursorpad to select the sen-
tence then press the ENT key.
5. Press the cursorpad ( W or X ) to select
the TX interval.
6. Press the ENT key.
7. Press the MENU ESC key to close the sentence window.
Sentence Available TX interval
GGA, GLL, GNS, RMC,
VBW, VLW, VTG, XDR,
ZDA [- - -] (off), [1s], [2s], [3s], [4s], [5s], [10s]
HDT, HRM, ROT, THS,
GPatt, GPhve, GPimu [- - -] (off), [0.020s]*, [0.025s]*, [0.1s]*, [0.2s], [1s], [2s], [4s]
*: Available when selecting [38400 bps] at step 7.
Sentence Available TX interval
GGA, GLL, GNS, RMC,
VBW, VLW, VTG, XDR,
ZDA [- - -] (off), [1s], [2s], [3s], [4s], [5s], [10s]
HDT, HRM, ROT, THS,
GPatt, GPhve, GPimu [- - -] (off), [0.020s], [0.025s], [0.1s], [0.2s], [1s], [2s], [4s]
GN 3D
-