Furuno GP-1871F, Руководство оператора

Страница: 17 / 97

1. SYSTEM INTRODUCTION
1-8
1.7 Countdown Beeps
When you turn the system off, the count-down timer is accompanied by a beep for
each second in the count-down. You can enable/disable the beep to suit your require-
ments.
1. Tap the [Home] icon to show the [Home] screen, then tap [Settings] => [General]
=> [Key Beep].
2. Tap the toggle box to the right of [Key Beep] to show [OFF]. Key beeps are now
disabled. To enable key beeps, tap the toggle box to show [ON].
3. Tap the [
u
] icon at the top-right corner of the menu to close the menu.
1.8 Function Gestures Setup
The “Function Gesture” is a two-finger tap function that works as a shortcut for regu-
larly used operations.
1. Tap the [Home] icon to show the [Home] screen, then tap [Settings] => [General]
=> [Function Gestures].
2. Tap the setting at [Two Finger Tap] or [Two Finger Double Tap], as appropriate.
3. Tap the function you want to set as a shortcut.
4. Tap the [
u
] icon at the top-right corner of the menu to close the menu.
1.9 Man Overboard (MOB)
The MOB mark denotes man overboard position. Enter the mark when someone falls
overboard, to automatically create a route to the man overboard position. Only one
mark can be displayed. The MOB mark appears on both the Plotter and Radar pages.
1.9.1 How to mark MOB position
From the Home screen, tap the MOB icon at the top-left of the screen. The plotter dis-
play appears if you are using a different screen. The MOB mark is put at the latitude
and longitude position of your boat at the moment the key is pressed and a new route
is started with the MOB set as the destination. A yellow colored line joins the MOB and
your ship on the screen to indicate the shortest route to the MOB. The range and bear-
ing to the MOB appears at the bottom-right corner of the screen with a red back-
ground.
MOB indication on the plotter screen MOB indication on the radar screen