Furuno FV-110, Руководство оператора

Страница: 67 / 240

Calibration
5-5
Table 5-2: Position mode options
a. This is only available if the antenna’s GNSS module supports GLONASS and
BeiDou.
5. Click Apply .
Acquisition process and search pattern
W
ith heading input or fixed heading
1. The FV-110 starts the acquisition, searches for 10 seconds at the expected position. If
RX lock is detected the FV-110 goes to Tracking.
2. If no RX lock is detected, a box search pattern is started and the positions where RF
power can be received are stored.
Figure 5-4: Acquisition, search pattern
3. The FV-110 checks each stored position for up to 10 seconds. If RX lock is detected
for more than 20% of the time, the FV-110 goes to Tracking.
Position
mode
Description
Mode Select one of the following:
• GNSS (default)
• Manual
Important: Do not use manual GPS input for vessels underway.
If using manual GPS input, set to GNSS before leaving port.
GNSS
a
Select one of the following:
• GPS (default)
• BEIDOU
• GPS + BEIDOU
• GLONASS
• GPS + GLONASS
Latitude,
Longitude,
Altitude
Enter the values if you have set the Position Mode to Manual .