Furuno FSV-75, Руководство оператора

Страница: 202 / 235

10. MAINTENANCE
10-14
10.10.6 Panel test/SIO test
The panel test/SIO test checks the operational status of the control unit’s keys, knobs
and trackball. To conduct this test, select [1 Panel/SIO Test] from the second page of
the [Test] menu.
Press the MENU/ESC key to close the results.
Panel test section
Control to test Method for check
Keys, Left button,
Right button
Press, then release, each key (other than the power key ( ) or
MENU/ESC key).
The corresponding location on the test screen shows a “1” (pressed)
or “0” (released) if the key or button is functioning correctly.
Scrollwheel 1) Push, then release the scrollwheel. The indication shows a “1”
(pressed) or “0” (released) if the scrollwheel is functioning cor-
rectly.
2) Spin the scrollwheel upwards, then downwards. The indication
shows a “d” if the scrollwheel is functioning correctly.
Knobs Turn each knob clockwise, then counter-clockwise.
The corresponding location on the test screen shows a positive val-
ue (clockwise) or negative value (counter-clockwise) if the knob is
functioning correctly.
PANEL TEST
SIO TEST
NMEA1 =
NMEA2 =
NMEA3 =
NMEA4 =
NMEA5 =
AD10 =
1
2
0
0
0
0 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 0 0 0
0 0 0 0 0 0 0
0 0 0
X = 0
Y = 0
d = 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 0
0 0
0 0 0 0
0
0
0
0
0
0
0
0
0
0 0
0 0 0
0 0 0
X = 0
Y = 0
d = 0
Press Menu/Esc key to cancel.
*
: When two control units are connected, “1” indicates control unit 1 and “2” indicates control unit 2.
*
*