Furuno FSV-75, Руководство оператора

Страница: 130 / 235

5. 3D MODE
5-20
4. Select [6 Setting File], then left-click.
5. Select [1 Save], then left-click.
The file name, which appears in the [File Name] box, is automatically assigned as
shown below.
Fish3DRatioFile_yyyy_mm_dd_hh_mm_ss.ini
6. Select where to save the setting data, from the drop-down list of destinations.
7. Left-click the [Save] button. The progress bar advances as the saving progresses.
After the saving is completed, the [Setting File] menu appears.
8. Close the menu.
Note: When there in not enough space on the drive to save the coefficient settings (a
minimum of 500 MB is required), a warning message appears. Click the [Delete Data]
function to show the [Delete Data] window (see section 8.8), then remove unneces-
sary files. Repeat the above procedure when the drive has sufficient free space to
save motion images.
5.11.5 How to load the coefficient setting data
To load the coefficient setting data saved at section 5.11.4, do as follows:
1. Open the menu.
2. Select [7 3D Functions], then left-click.
3. Select [7 Density Calculations], then left-click.
4. Select [6 Setting File], then left-click.
Drop-down list of destinations Drop-down list of destinations
Progress bar
Fills in blue color, from left-to-right,
indicating the save progress. Progress bar
Fills in blue color, from left-to-right,
indicating the save progress.