Furuno FR-8045, Руководство по установке

Страница: 37 / 48

4. OPTIONAL EQUIPMENT
32
3. Mate P107 on the ARP Circuit-board with J214 on the 03P9586 Board and fasten
with four screws.
4. Reassemble the display unit, taking care not to exceed the torque requirements
for each connector nut. (See the figure below for nut torque.)
ARP board
Confirm that the rubber gasket is set
securely in the groove around the panel.
Torque
2.94
± 0.29 Nm
Torque
0.78
± 0.08 Nm
Torque
0.78
± 0.08 Nm
(12 pcs)