Furuno FI-70, Руководство оператора

Страница: 79 / 98

6. MAINTENANCE, TROUBLESHOOTING
6-3
The following table shows the alarms which may be displayed on the FI-70, in priority
order, with their respective pop-up messages.
For information on how to set alarms see chapter 3.
Alarm code Pop-up message Reason/Possible remedy
001 Check Engine. Engine warning/alarm. Check the engine
and engine sensor.
003 Low Oil Pressure. Oil pressure warning/alarm. Check the oil
pressure and pressure sensor.
005 Over Temperature. Coolant high temperature warning/alarm.
Check the coolant temperature and tem-
perature sensor.
007 Charge Indicator. Battery charge warning/alarm. Check the
battery, recharge or replace if necessary.
011 CPA Alarm, TCPA Alarm. Dangerous target warning/alarm. Adjust
course to avoid collision.
021 Low voltage alarm. Battery voltage warning/alarm. Check the
battery voltage, replace if necessary.
031 Missing depth data. Depth data timeout. Check connection to
depth sensor and sounder.
033 Depth alarm. Depth is above/below threshold. Take ap-
propriate measures.
041 Missing position data. Connection to EPFS device has timed out.
Check connections to EPFS device.
043 Anchor alarm. Anchor distance/depth is over threshold.
Check anchor and vessel position.
051 Missing wind data. Connection to sensor has timed out.
Check connections to wind sensor.
053 Max TWS alarm. True wind speed is over threshold. Take
appropriate measures.
055 Wind shift alarm. Wind direction has shifted abruptly. Take
appropriate measures.
057 Low AWA alarm. Port-side wind is over threshold. Take ap-
propriate measures.
059 High AWA alarm. Starboard-side wind is over threshold.
Take appropriate measures.
061 Missing water temp data. Connection to sensor has timed out.
Check connections to water temp sensor.
063 Water temp alarm. Water temperature is over/under thresh-
old.
071 Missing STW data. Connection to sensor has timed out.
Check connections to speed sensor.
073 STW alarm. Speed is over/under threshold. Adjust
speed appropriately.
075 Missing SOG data. Connection to sensor has timed out.
Check connections to speed sensor.
077 SOG alarm. Speed is over/under threshold. Adjust
speed appropriately.
081 Missing trip data. Connection to plotter has timed out. Check
connections to plotter.
083 Trip alarm. Distance/time has been reached or ex-
ceeded.