manualshive.com logo in svg

Furuno FI-70, Руководство оператора

Поделиться
Скачать
Furuno FI-70 Скачать руководство пользователя страница 43

3.  ALARMS

3-9

3.10

CPA/TCPA Alarms

The CPA (Closest Point of Approach) and TCPA (Time to Closest Point of Approach) 
alarms activate when the distance between your vessel and an AIS target is smaller 
than the threshold set. This alarm is used as an aid to avoid collision.

Note: 

The CPA and TCPA alarms are a navigational aid only. Do not rely solely on 

these indications, for safe boating.

1. Access the [Alarms] menu, using the procedure outlined on page 3-1.
2. Press the 

software

 keys to select [CPA/TCPA Alarm], then press the 

function

 

key.

3. [Alarm] is highlighted, press the 

function

 key.

4. Select [OFF] or [ON] as appropriate, then press the 

function

 key. 

•  [OFF]: Disable the alarm. Proceed to step 9.
•  [ON]: Enable the alarm.

5. Press the 

software

 keys to select [CPA], then press the 

function

 key.

6. Press the 

software

 keys to set the threshold as appropriate, then press the 

func-

tion

 key to apply the changes.

7. Press the 

software

 keys to select [TCPA], then press the 

function

 key.

8. Press the 

software

 keys to set the threshold as appropriate, then press the 

func-

tion

 key to apply the changes.

9. Press the 

Menu/Back

 key twice to close the menu.

Содержание FI-70



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды