Furuno FI-70, Руководство оператора

Страница: 11 / 98

1-1
1. OPERATION AND CONTROLS
OVERVIEW
1.1 Controls
The information shown in the display area varies depending on the category chosen
to be displayed.
1.2 How to Turn the Power On/Off
The FI-70 turns on when the CAN bus/NMEA2000 network is powered. The FI-70 will
undergo a self-test, then display the last-used screen if the test is completed
satisfactorily.
Press and hold the Power/Brill key to turn the FI-70 off. The message "Turning OFF
in 3 seconds" is displayed. Hold the key for three seconds. Early release of the Power/
Brill key will abort the shutdown. To turn the FI-70 on again, press the Power/Brill
key.
Key Functions
Power/Brill key Turn power on/off; open the [Brilliance] setting window.
Software keys Go back /forward one page; move the cursor; reduce/increase setting value.
Function key Confirm selection; change displayed data (not available in some display
modes).
Key indications Show the operative function for the Software and Function keys. Press any
key to display the indicators. If there is no operation, the indicators are
minimized after a short period of time, however, they are always displayed
when a menu is open. The indications vary, depending on the displayed
screen/menu.
Menu/Back key Open main menu; return one level in the menu; cancel.
Power/Brill
key
Left Software
key Function key
Right Software
key
Menu/Back
key
㻲㼡㼚㼏
50
º
AWA
A
㻺㼑㼤㼠 㻼㼞㼑㼢
Display area
㻲㼡㼚㼏 㻺㼑㼤㼠 㻼㼞㼑㼢 Key
indications