Furuno FELCOM250, Руководство по установке

Страница: 43 / 69

3. SETTING AFTER INSTALLATION
3-9
3.7 OTA Setting
OTA stands for Over The Air. The OTA function permits remote management of files
in the SIM card.
1. Click [OTA] in the Basic setting sub menu.
2. To enable the OTA, click the [Enabled] radio button. To disable the OTA, click the
[Disabled] radio button.
3. Click the [Apply] button to complete the setting.
With Enabled, OTA functions as follows.
a) User requests a change of contract contents to a SIM maker.
b) The SIM maker transmits an OTA message to the terminal.
c) The terminal receives the OTA message and modifies the internal parameters
according to the contract contents.
3.8 Handset Setting
To use the IP handset for calling, set the Web software and the IP handset as follows.
Web software setting
1. Click [Settings] in the menu bar.
2. Click [PBX Settings] in the Settings sub menu at the left side of the screen.
3. Click [Extension] in the PBX Setting sub menu.