Furuno FELCOM250, Руководство по установке, Страница: 39 / 69

3. SETTING AFTER INSTALLATION
3-5
3.3 Analog Port Setting
Set for analog telephones/faxes that are connected to the TEL ports as follows.
1. Click [Analog ports] on the Basic settings sub menu.
2. Click the [Edit] button on the right side of the port to set.
There are four TEL ports (TEL 1 to TEL 4), and TEL 1 is analog port 1 in the table.
3. In the [Type] box, select the equipment that is connected to the TEL port. The se-
lections are as follows:
• TEL: Analog telephone
• FAX: Facsimile
• TEL & FAX: Facsimile telephone
• No Connection: Nothing connected
4. Key in extension telephone number in the [Number] box. The setting range is be-
tween 1000 and 9999.
5. In the [Note] box, key in a name; user name, setting location, etc. This is the name
a called party sees. Up to 50 alphanumeric characters can be used. Do not use
symbols, "?", "/", etc.
6. Set up outside line calls in the [Voice ring] box.
If you selected TEL at step 3, “1st” is checked. Then, any terminals that have”1st”
checked ring first. Remove the check for no ring. Check “2nd” to ring 2nd terminal
when there is no answer at the terminal that has ”1st “checked. Ring duration time
can be set on the [2nd ring timer] of the PBX settings/General settings screen.
(See the operator’s manual.)