manualshive.com logo in svg

Furuno FELCOM250, Руководство по установке, Страница: 22 / 69

Поделиться
Скачать
Furuno FELCOM250 Скачать руководство пользователя страница 22

1.  HOW TO INSTALL THE UNIT

1-16

How to change modem settings

1. Press [Menu/set], [*], [2], [8], [6] and [4] keys in this sequence to enter the main-

tenance mode.
The fax machine beeps for approximately one second and displays "MAINTE-
NANCE" on the LCD. This means the FAX is in the initial stage of the maintenance 
mode.

2. Press [1] and [0] keys in this order. "WSW00" is displayed on the LCD.
3. "Press [1] and [3] keys in this order. "WSW13=X1X2X3X4X5X6X7X8" appears on 

the LCD. (default: WSW13=01011011)

4. Press [0], [0], [0], [1], [1], [0], [1], [0] and [Menu/Set] keys in this order.

(WSW13=00011010) "WSW00" appears after pressing [Menu/Set] key.

5. Press [Stop/Exit] key to return the machine to the initial stage of the maintenance 

mode.

6. Press [9] key twice to exit from the maintenance mode and return to standby.

1.6

Facsimile FAX-2840 (Option)

1. Set the facsimile on the mounting location.
2. Set a fixing plate (supplied) to 

both the right and left sides of the 
facsimile as shown in the right fig-
ure.

3. Fasten the fixing plates to the 

mounting location with self-tapping 
screws (supplied).

4. Attach the compass safe distance 

label at the location shown in the 
right figure.

5. Attach the supplied label (“INMAR”) 

to a noticeable location.

Fixing plate

Lifting grip

Self-tapping 
screw
5x20 SUS304
(4 places)

1

5

Compass safe 

distance label

Содержание FELCOM250






































































Отзывы:

Нет отзывов