Furuno FELCOM19 Inmarsat Mini-C MES, Руководство по установке

Страница: 26 / 51

3. INITIAL SETTINGS
3-8
2 key: [MY SFI Setup]
Set this FELCOM’s SFI number, which is
the four-digit number that follows “CS”.
(The setting range is 0001 to 9998.).
Note: Be sure to use an SFI not used by
other devices in the shipboard network.
3 key: [Transmission Group Setup]
Set the AMS transmission group.
4 key: [Error Log]
The [Error Log] compiles AMS
related errors. To delete an error
log entry, select the log then
press the
1 , Enter key.
The error log holds
4,294,967,295 entries. When the
log becomes full, the message
"LIMIT MAX" appears.
7. Press the Esc key several times to close the menu.
3.5 PC Window Setup
The [Terminal Setup] menu provides for set up of the PC window. The set up includes
selection of date display format, screen saver and window colors.
1. Press the F8 and 3 keys to show the [Terminal Setup] menu.
[ MY SFI Setup ]
Set SFI not used for other equipment.
0001 to 9998: SFI No.
E: Exit
Enter SFI No.:
Command Window
SFI CS0001
[ Transmission Group Setup ]
E: Exit
Enter Group No:
Command Window
2. TGTD
3. SATD
1. MISC ON
5. VDRD
6. RCOM
4. NAVD
8. PROP
9. USR
7. TIME
Transmission Group Multicast Address Destination Port
MISC 239.192.0.1 60001
TGTD 239.192.0.2 60002
SATD 239.192.0.3 60003
NAVD 239.192.0.4 60004
VDRD 239.192.0.5 60005
RCOM 239.192.0.6 60006
TIME 239.192.0.7 60007
PROP 239.192.0.8 60008
USR1 to USR8 239.192.0.9 to
239.192.0.16 60009 to
60016
[ Error Log ]
Command Window
Datagram header error xxxxxxxxxx*
TAG block formatting error xxxxxxxxxx
TAG checksum error xxxxxxxxxx
TAG syntax error xxxxxxxxxx
TAG framing error xxxxxxxxxx
Sentence syntax error xxxxxxxxxx
UDP checksum error xxxxxxxxxx
Total 4294967295 LIMIT MAX
1. Log Clear
E: Exit
Enter JOB No.:
*: xxxxxxxxxx: Error log count
Connection
Date Disp. Form YY-MM-DD
Screen Saver
OFF
Window Color
Window Size
Normal
Terminal Setup