Furuno Felcom 30, Руководство по установке

Страница: 41 / 55

34
4. Set the telephone to the four catches in the mounting base and then slide it toward you
until you hear a click.
5. Attach the “SLIDE” label (supplied) to the handset.
6. Attach English language label (supplied) to the telephone.
7. Attach the label (16-007-6927-0) for compass safe distance as shown below.
Label (16-007-6927-0)
Telephone, attaching the label
Serial printer ML280S
Set the DIP switches in the ML280S as shown below. These switches are under the small
cover on the top of the printer. (See the printer’s manual for the location.)
OFF ON
1
2
3
4
5
6
7
8
SW 1
OFF ON
1
2
3
4
5
6
7
8
SW 2
Set for 4,800 bps
connected to printer port
High at Power on *
OFF
Switch no. ON FUNCTION
1
2
3
4 Invalid Valid * DSR I/P Signal
5 512 Bytes 32 Bytes * Bufer Threshold
6 1 sec. 200 ms * Min. Busy Time
7 High when selected DTR Signal
8 * Not Used
Switch bank 2
ON *
ON *
Baud rate
4,800
Off *
Switch no. OFF ON FUNCTION
1 Even Odd * Parity
2 With No * Parity
3 7 8 * Databits
4 X-on/X-off Ready/Busy * Protocol
5 Monitor Circuit * Test Select
6 Test Print Mode Select
7
Busy line
8
RTS (-9V) pin 4
Switch bank 1
Off *
ON *
* Correct setting
www.reelschematic.com
www.reelschematic.com