manualshive.com logo in svg

Furuno FE-800, Руководство оператора, Страница: 18 / 60

Поделиться
Скачать
Furuno FE-800 Скачать руководство пользователя страница 18

1.  OPERATION

9

1.5

Menu Overview

1. Press the 

MENU/ESC

 key to open the Main menu.

2. Use the 

 or 

 key to navigate the menu. The item currently selected is highlighted.

3. To choose a menu item, press the 

 ENT

 key.

Depending on which item is selected, a new menu, a setting window or a setting box is 
displayed.

4. Use the 

 or 

 key to navigate the menu or adjust settings as required.

5. Press the  

 ENT

 key to open the selected item, or to apply the setting changes.

 To return to the previous menu, or to abandon changes, press 

 or the 

MENU/ESC

 key.

6. Press the 

DISP

 key once, or press the 

MENU/ESC

 key several times to close the menus.

Note 1: 

If [FE-8020 No.2] is not enabled in the [Service Menu], the following menu items are grey 

and not selectable:
• Main menu 

 [FE-8020 Select]

• [Sounder] menu 

 [FE-8020 No.2]

• [System] menu 

 [Parameters] 

 [FE-8020 No.2]

• [System] menu 

 [Information] 

 [FE-8020 No.2]

To enable [FE-8020 No.2], consult a FURUNO technician.

Note 2: 

For brevity, all further references to the 

 

ENT

 key are written as “

ENT

 key”.

If the display settings are set to FORE - AFT at installation, some pop-up menu layouts will change 
according to the FORE - AFT or AFT - FORE display order.

The example below shows both the default, AFT - FORE, and the custom display order of 
FORE - AFT.

For the sake of brevity, all explanations and images in this manual use the default.

Selected item 
is highlighted.

Unselectable 
items are grey.

Newly opened menu

Settings window

Settings box

Default

Custom

Reversed

Содержание FE-800





























































Отзывы:

Нет отзывов