manualshive.com logo in svg

Furuno FCV-588, Руководство оператора, Страница: 33 / 80

Поделиться
Скачать
Furuno FCV-588 Скачать руководство пользователя страница 33

26

2.

SYSTEM MENU

2.1

How to Display the 
System Menu

The [System] menu mainly consists of items 
which do not require regular adjustment.

1. Press the 

MENU/ESC

 key to open the 

menu.

2. Select [System]. For [Tests], and [Re-

store], see Chapter 3. See Chapter 4 for 
“NMEA”.

2.2

Range Menu

[

Range 1

] - [

Range 8

]: Set range 

of each of the eight ranges 
(available range: 7 to 4,000 ft). 
Note that all default ranges are 
restored whenever the depth unit is changed. 

Therefore, change the depth unit before 
changing the preset ranges.

Note: 

The deepest detection range of Auto 

Range is the largest setting of [Range 1] to 
[Range 8] of Manual Range. In case the sea 
bottom is deeper than the largest setting of 
Auto Range, set the setting of [Range 1] to 
[Range 8] deeper than the sea bottom.

[

Zoom Range

]: Select the range 

to zoom in the bottom zoom and 
marker zoom modes.

[

B/L Range

]: Select the expan-

sion width for the bottom lock 
display.

2.3

Key Menu

[

FUNC Key

]: Select the item to program to the 

FUNC

 key. The programming can also be 

done by long-pressing the 

FUNC

 key. See 

section 1.18.2.

[

Key Beep

]: Turn key beep on or off.

2.4

Language Menu

[

Language

]: The system language is avail-

able in English, and European and Asian lan-
guages. To change the language, select the 
appropriate language, then press the 

ENTER

 

key.

Standard spec.

Menus
shown
when
[System]
is selected.

Tankenmaru

Tankenmaru spec.

Содержание FCV-588

















































































Отзывы:

Нет отзывов