1. OPERATION
1-39
1
*: Requires water temperature data.
4. Select [Apply] to save the current changes and change or adjust other settings.
Select [OK] to save the current changes and close the menu window.
Select [Cancel] to abort all changes and close the menu window.
1.23
How To Show/Hide Navigation Data
Various navigation data can be shown at the top-left corner*.
* The location of the navigation data can be changed. See "[Data Position]" on page 4-
5 for details.
To show/hide the navigation data, select the [Data Display] icon (
) from the Instan-
tAccess bar™, then, referring to the figure below, select the data to show or hide.
[Temperature]*
[Temperature]: Set the water temperature alarm type.
• [Inside]: Audiovisual alarm is released when the temperature is with-
in the alarm range setting.
• [Outside]: Audiovisual alarm is released when the temperature is
outside the alarm range setting.
[From]: Set the starting temperature for the alarm.
[Span]: Set the span of the alarm.
[Fish Size Graph]
[Fish Size Graph]: Sets the fish size(s) which trigger the Fish Size
Graph Alarm. Multiple selections are available.
[Fish Graph Scale Threshold]: Set the distribution rate at which to trig-
ger the alarm. For example, a setting of [30%] will trigger the alarm
when the distribution rate for the selected size is over 30% and the se-
lected graph bar is “1st peak”.
•
Latitude and longitude position
• Roll, pitch, heave
• Time and date
• Water temperature
• SOG
• Timer (
elapsed time from input of marker)
• STW
Menu item
Description
Own ship location (latitude/longitude)
Water temperature
Time and date
Roll, pitch, heave
W t
t
Time and date
Speed Over the Ground
Speed Through the Water
Timer
