1. OPERATION
1-22
1.10.2
Interference rejection for external echo sounders where "Ex-
ternal Fish Finder Window" is set to "Off" at installation
1. Click the [Advanced Settings] icon (
) from the InstantAccess bar™, then click
the [Advanced Settings] icon (
) to show the [Advanced Settings] window.
2. Click the [Sounder] item from the [External Fish Finder] menu, on the left-side of
the window. The external fish finder settings are shown on the right-side of the
window.
3. Click the [Interference] setting. The drop-down options box appears at the far
right-side of the window.
4. Click the drop-down box, then select the appropriate interference level, referring
to the table in section 1.10.1.
5. Click [Apply] to save the current changes and change or adjust other settings.
Click [OK] to save the current changes and close the menu window.
Click [Cancel] to abort all changes and close the menu window.
1.10.3
Interference rejection for external echo sounders where "Ex-
ternal Fish Finder Window" is set to "On" at installation
1. Place the cursor inside the external fish finder screen, then right-click. The [Exter-
nal Fish Finder] menu appears.
2. The [Sounder] menu is already selected.
3. Click the [Interference] setting. The drop-down options box appears at the far
right-side of the window.
4. Click the drop-down box, then select the appropriate interference level, referring
to the table in section 1.10.1.
5. Click [Apply] to save the current changes and change or adjust other settings.
Click [OK] to save the current changes and close the menu window.
Click [Cancel] to abort all changes and close the menu window.
External fish finder’s
interference rejection setting.
FCV-38 [ver 0252473-xx.xx]
