manualshive.com logo in svg

Furuno FCV-38, Руководство по установке

Поделиться
Скачать
Furuno FCV-38 Скачать руководство пользователя страница 50

3.  INITIAL SETTINGS

3-16

3.6

Stabilization Setting

The [Stabilization] menu compensates for the effects of heaving, and requires a Sat-
ellite Compass.

Note 1: 

The menu is not available when there is no data from the Satellite Compass.

Note 2: 

This function is NOT available when [In Trigger] in [Shared Settings] is set to 

[On].

3.6.1

Stabilization for main system transducer

Set the stabilization menu for main system and external system transducers when the 
[External sounder] is set [Off].

1. Select the [Advanced Settings] icon (

) from the InstantAccess bar, and select 

the [Advanced Setting] icon (

) from the expanded menu bar.

2. Select [Stabilization] menu from the [System] menu.

The [Stabilization] menu appears.

3. Set the calibration parameters referring to the table below:

Item

Setting values

Meaning

[Stabilization]

[Off] (default), 
[On]

Set to [On] to enable the stabilization mode.
Turn this function on when seas are rough, to get 
stable pictures. When heaving stabilization is 
turned on, the symbol (

) appears at the [Ad-

vance] header on the screen.

[Stabilization 
Area]

[0] to [20]
(default: [20])

Adjusts the stabilization line (m).

[Beam Stabili-
zation]

[Off] (default),
[On]

Set to [On] to enable the beam stabilization.

FCV-38[ver 0252473-xx.xx]

Motion Sensor

Содержание FCV-38


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды