Furuno FCV-38, Руководство по установке

Страница: 41 / 81

3. INITIAL SETTINGS
3-7
3.3 Communication Port Setting
You can set the communication port (NMEA1 to NMEA5) from the [Tests] menu. To
select the signals for communication, do the following.
1. Select the [Advanced Settings] icon ( ) from the InstantAccess bar and select
the [Advanced Setting] icon ( ) from the expanded menu bar.
2. Select [Tests] from the [System] menu.
The [Tests] menu appears on the right-hand side of the window.
[Step
Gain
Calibra-
tion] [Low] [-50.0] to [2.0]
(default: [0.0], step: 0.1) Set gain increment (dB) at low fre-
quency.
[Mid] [-50.0] to [2.0]
(default: [-15.5], step: 0.1) Set gain increment (dB) at mid fre-
quency
[Hi] [-50.0] to [2.0]
(default: [-31.2], step: 0.1) Set gain increment (dB) at high fre-
quency
[Processor Unit IP
Address] [1] to [254]
(default: [7]) Set the fourth octet of IP address 1
for the processor unit and the trans-
ceiver unit.
Note 1: The first to third octets are
fixed to 172.31.2.
Note 2: Each IP address must be
unique between units.
[Transceiver Unit
IP Address] [1] to [254]
(default: [9])
[PRC Settings] Select X button to show the contents for the signal parameter set-
ting.
[Update PRC Set-
tings] Select
X
button to show the confirmation message to reset the sig-
nal parameter setting. Select [Yes] to reset on the confirmation
message.
Item Setting value Meaning
FCV-38[ver 0252473-xx.xx]