Furuno FCV-38, Руководство по установке

Страница: 35 / 81

3-1
3. INITIAL SETTINGS
This chapter covers the initial setup of the equipment.
3.1 How to Set the Language and Measurement Unit
Set the language and measurement unit from the advanced setting menu at installa-
tion.
1. Turn the power on.
Open the power button [ ] cover on the trackball control unit, then press the
power button. An audible “beep” indicates the equipment is starting up and the
start-up screen appears.
2. Show the InstantAccess bar
™
by press the [ ] but-
ton at left-top when the InstantAccess bar is hidden.
To hide the InstantAccess bar, press the [
] button
or right-click the trackball control on any section of the
screen.
3. Select the [Advanced Settings] icon ( ) from the In-
stantAccess bar to expand the [Advanced Settings] menu bar.
4. Select the [Advanced Settings] icon ( ) from the Menu bar.
The [Advanced Settings] menu window appears.
5. Select [User Interface Settings] from the menu.
The user interface settings appear.
6. Select the appropriate language from the [Language] item. The setting languages
are English (default setting) and Japanese.
7. Select the measurement units.
Item Meaning Unit Default
[Depth] Water depth
m, ft, fm, , pb
ft
[Speed] Ship’s speed kn, km/h, mph kn
InstantAccess
bar
TM
FCV-38[ver 0252473-xx.xx]
Confirm changes and
close the menu.
Apply changes.
(Menu remains open).
Cancel changes and
close the menu.
Select this icon to reset
the current menu settings
to factory default.