manualshive.com logo in svg

Furuno FCV-38, Руководство по установке

Поделиться
Скачать
Furuno FCV-38 Скачать руководство пользователя страница 12

1.  MOUNTING

1-4

1.3

Trackball Control Unit

The trackball control unit can be installed on a desktop or flush mounting (option). For 
desktop mounting, the unit can be tilted or laid flat.

Mounting Consideration

Select a mounting location, keeping in mind the following points:

•  Select a location where the control unit can be operated easily.
•  Locate the unit out of direct sunlight and away from heat sources.
•  Locate the unit away from places subject to water splash and rain.
•  Referring to the outline drawings at the back of this manual, allow sufficient space 

for maintenance and service.

•  Select a mounting location considering the length of the cables to be connected to 

the unit.

•  A magnetic compass will be affected if the unit is placed too close to the magnetic 

compass. Observe the compass safe distances at the front of this manual to prevent 
interference to a magnetic compass.

•  Select a location where shock and vibration are minimal.

1.3.1

Desktop mount

How to mount the unit tilted

Use the desk fixing plate to mount the unit tilted.

1. Attach the desktop fixing plate to the trackball control unit, using the two washer

head screws (M3×8, supplied).

Desktop fixing plate

Washer head screw

(M3×8, 2 pcs.)

Содержание FCV-38


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды