Furuno FCV-288, Руководство оператора

Страница: 21 / 56

1. OPERATION
13
1.16 FUNC Key
The FUNC key provides for one-touch call up
of desired function setting window. 8 items
are available: picture advance, shift, interfer-
ence, clutter, color erase, white line, white
marker, and TVG.
1.16.1 How to use the FUNC
key
1. Short-press the FUNC key to open the
setting window programmed; for exam-
ple, the [Pic. Advance] setting window.
[Pic. Advance] setting window
2. Use the FUNC key,
S
or
T
to select a
setting and press the ENTER key.
1.16.2 How to change the func-
tion
1. Press and hold down the FUNC key to
show the [FUNC Key] menu.
2. Select a function and press the ENTER
key.
1.17 Position Data
To output the position data, follow the proce-
dure below.
1. Press the MARK key. The cross cursor
appears on the screen.
Cross cursor
Note: If there is no position data the mes-
sage "No position data!" appears. Check
the navigator.
2. Press the TrackPad to set the cross cur-
sor where desired.
3. Press the MARK key again to output the
position.
Guide for how to output
the position data
x1
0
0.0
36.8
ft
MANUAL L:2.0/H:2.0 LF
36.8ft 50.0
°
F
/ / / : Move cursor
[ENTER] / [MARK] : Set
[MENU] :
Cancel
Depth and water temperature at cursor
position
20
40
60
Position entry window
Cross Cursor
LF L:AF