manualshive.com logo in svg

Furuno FCR-2119-BB, Руководство по эксплуатации

Поделиться
Скачать
Furuno FCR-2119-BB Скачать руководство пользователя страница 248

7.  HOW TO MANAGE CHARTS

7-14

7.11

How to Backup, Restore Licenses

You can make backup copies of your ENC, ARCS and AVCS (AIO) licenses and save 
them to a USB flash memory. If re-installation of the licenses becomes necessary, you 
can reinstall them from the USB flash memory. The backup and restore functions are 
not available with C-MAP charts.

To backup licenses:

1. Insert a USB flash memory into the USB port on the Control Unit. 
2. Get into the Chart maintenance mode then click the [License] button on the

InstantAccess bar™ to show the [Licenses] dialog box.

3. Click the [Backup Licenses] button.
4. Select the USB flash memory then select the folder in which to save the licenses, 

then click the [OK] button.
The license files (ENCpermit.dat, ARCSpermit.dat) are saved in the selected fold-
er.

5. Click the [OK] button.

To restore licenses:

1. Insert the USB flash memory that has the licenses into the USB port on the Control 

Unit. 

2. Get into the Chart maintenance mode then click the [License] button on the

InstantAccess bar™ to show the [Licenses] dialog box.

3. Click the [Restore Licenses] button.
4. Select the USB flash memory then select the folder in which licenses are saved, 

then click the [OK] button.

5. Click the [OK] button.

Содержание FCR-2119-BB






























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды