Furuno FB-3101, Руководство оператора, Страница: 21 / 56

13
4. TROUBLESHOOTING
This chapter gives guidelines for troubleshooting and provides an overview of the different means
of status signalling. It has the following sections:
• Status signalling
• Event messages
• Troubleshooting guide
• Service and repair
4.1 Status Signalling
Both the Alarm Panel, the IP Handset and the Communication Unit have means of signalling the
status of the system.
4.1.1 Alarm Panel
The Alarm Panel display can show:
4.1.2 IP Handset for Safety Voice
The IP Handset for Safety Voice can show warnings and display a
list of active events in the total FleetBroadband system.
To see the list of events, press the Enter key and select [Notifica-
tions]. For a list of the event messages related to Safety Voice, see
the next section, Event messages.
For further information on the IP Handset, see the Operator’s Man-
ual (OME-57050) for FELCOM251/FELCOM501.
Event/Status Display
Connected to Communication Unit
FB
Fault in connection to Communica-
tion Unit
FB (flashing) without
Fault in connected equipment, net-
work or configuration Fault
Distress communication ongoing
(incoming or outgoing) Distress
System is in Distress test mode Test