Furuno FAR-3220Z, Руководство по установке

Страница: 15 / 28

3-1
3. SETTINGS AND ADJUSTMENTS
3.1 How to Connect the Surveillance Radar for
Settings and Adjustments
Among the equipment setting menus, those that set values specific to the surveillance
radar cannot be displayed in the menu of EC-3000. These items are set by connecting
laptop PC(s) to the LAN.
3.1.1 How to connect PC(s) to the surveillance radar
As shown in the figure below, there are two ways to connect PC(s) to the surveillance
radar.
Method 1 : Connect a pair of laptop PCs to the EC-3000 with two HUBS, as shown by
(1) and (2) in the figure below.
Method 2 : Connect a monitoring PC directly to the EC-3000, as shown by (3) in the
figure below.
3.1.2 Software connection
Use TeraTerm* to connect to the SPU board by using TCP/IP. For the network con-
nection, see the applicable document, issued separately.
Be sure the IP address of the SPU board is not the same as the one for the monitoring
PC.
* An open-source software package designed to be used for emulation purposes.
Antenna
Unit
Waveguide
Transceiver
Unit
EC-3000
LAN
HUB
Laptop
PC
Laptop
PC
HUB
Monitoring
PC
Main observation room Remote radar
installation room