Furuno FAR-1416, Руководство оператора

Страница: 94 / 226

3. TARGET TRACKING (TT)
3-4
Note: When the capacity for acquisition is reached full, the message “TT TGT FULL
(AUTO)” appears and further acquisition does not work. To enable the acquisition,
cancel some target trails which have no dangerous situation.
3.4 How to Cancel Target Tracking
When the number of tracked targets reaches maximum capacity, the alert box shows
[TT TARGET FULL (MAN)] or [TT TARGET FULL (AUTO)], based on the selected TT
mode. No new targets can be acquired until a tracked target is lost or tracking is can-
celed. When this occurs, cancel tracking for non-dangerous targets as required.
3.4.1 How to cancel tracking for individual TT targets
Cursor using
1. Press the CURSOR ON/OFF key when cursor is not shown on the screen.
2. Select the operational display area, then press the right button .
The [CURSOR] menu appears.
3. Select [TARGET CANCEL], then press the left button .
4. Select the tracked target to cancel, then press the left button .
Cancel key using
1. Press the CURSOR ON/OFF key when cursor is not shown on the screen.
2. Move the cursor onto the tracking target symbol desired to cancel, then press the
CANCEL key.
Note: When the TT list is shown, you can cancel the target tracking from the list.
Move the cursor onto the column of tracking target desired, then press the CANCEL
key.
3.4.2 How to cancel tracking for all TT targets
1. Open the [MAIN MENU].
2. Select [OTHER SHIP’S INFO.], then press the
left button .
The [OTHER SHIP’S INFO. 1/2] menu appears.
3. Select [TT], then press the left button .
4. Select [ALL CANCEL], then press the left button .
5. Select [YES], then press the left button to cancel tracking for all TT targets.
6. Close the menu.