Furuno FAR-1416, Руководство оператора

Страница: 92 / 226

3. TARGET TRACKING (TT)
3-2
3.2 TT Symbols and Attributes
3.2.1 TT symbols
3.2.2 How to display the TT symbols
1. Open the [MAIN MENU].
2. Select [OTHER SHIPS’ INFO.], then press the
left button .
3. Select [TT], then press the left button .
4. Select [TT SYMBOL DISPLAY], then press the left button .
5. Rotate the scrollwheel to select [ON], then press the left button .
To hide the TT symbols, select [OFF].
6. Close the menu.
3.3 How to Select the TRAIL mode
3.3.1 How to select auto/manual trail mode
Target tracking is available in three modes: [MANUAL 50] (up to 50 targets, selected
manually), [MANUAL 25•AUTO 25] (up to 50 targets, 25 selected automatically, 25 se-
lected manually) and [AUTO 50] (up to 50 targets, selected automatically). To select
a target tracking mode, do the following:
1. Open the [MAIN MENU].
Automatically
acquired target
symbols shown.
For manually
acquired
targets, the
width of the line
for “steady
tracking” TT is
thicker than that
of the
automatically
acquired
targets.
Acquisition
zone
Target selected
for data readout
Symbol Item Status Remarks
Initial stage Broken circle around an echo to indicate that
the target is under acquisition and initial stage
of tracking, before steady-state tracking.
Steady tracking Solid circle with vector indicating steady state
tracking (within three minutes after
acquisition.)
CPA alarm Plotting symbol (red) flashes to indicate the
target is predicted to come into CPA or
TCPA.
CPA alarm
acknowledge Shown in red, and flashing stops after
CPA/TCPA alarm is acknowledged.
Lost target A red “X” is crossed through the TT symbol
to indicate that it is a lost target. Flashing
stops after lost target is acknowledged.
On selected target Target data (range, bearing, course, speed,
CPA, TCPA, BCR, BCT, etc.) displayed in
information box.
On target passing
through operator-set
acquisition zone Symbol is red and flashing.
Within one minute after acquisition (vector
still inreliable).
(flashing)
(flashing)
(flashing)