Furuno ENVISION AR-100M, Руководство оператора

Страница: 43 / 73

2. INSTALLATION AND INITIAL SETTINGS
2-13
2.3.3 How to setup the CCRP
Do as follows to setup the CCRP (Consistent Common Reference Position). The AR
navigation system uses CCRP as reference points for CPA/TCPA calculations.
1. Login as a service technician, referring to subsection 2.3.1.
2. Click [Service Setting].
3. Click [CCRP].
4. Adjust the slider bar for [Position] to set the CCRP calculated from the location of
the EPFS device to use as a reference.
• [X]: Set the port-starboard (lateral) location of the CCRP, which is calculated
from the location of the EPFS device.
• [Y]: Set the bow-stern (longitudinal) location of the CCRP, which is calculated
from the location of the EPFS device.
5. Close the main menu.
2.3.4 How to setup the bow position
Do as follows to setup the bow position. The AR navigation system uses bow position
as reference points for BCR/BCT calculations.
1. Login as a service technician, referring to subsection 2.3.1.
2. Click [Service Setting].
3. Click [Bow].
CCRP
(0, 0)
+ -
X
Y
EPFS
device
+
-
(0, 0)
+ -
X
Y
Bow
EPFS
device
-
+