Furuno DS-60, Руководство по установке

Страница: 3 / 74

i
SAFETY INSTRUCTIONS
WARNING
CAUTION
Have a qualified serviceman do the
installation.
Only qualified personnel should work
inside the equipment.
Use Chugoku Toso brand Marine Star
20 anti-fouling paint or the equivalent
for the transducer.
Coat thinly and evenly. A thick coat can
reduce output power.
Turn off the power at the switchboard
before installing the equipment.
Fire or electrical shock can result if the
power on.
Confirm that the power supply voltage
is compatible with the voltage rating of
the equipment.
Connection to the wrong power supply can
cause fire or damage to the equipment.
The mounting location for the display,
distributor and transceiver unit must
satisfy the following conditions:
-Away from rain and water splash
-Out of direct sunlight
-Away from air conditioner vents
-Moderate and stable in temperature and
humidity
Do not install the unit in a place subject
to rain or water splash.
Fire or electrical shock can result.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Warning, Caution
Mandatory Action
Prohibitive Action
Observe the compass safe distances to
prevent interference to a magnetic compass.
DS-600
DS-605
DS-610
DS-620
DS-640
DS-670
DS-645A
DS-645B
Standard
CAUTION
Attach protective earth securely to the
ship’s body.
The protective earth (grounding) is required
for the AC power supply to prevent electri-
cal shock.
Do not weld the tank with transducer to
the ship’s hull.
Use the specified power cable.
Fire can result if an incorrect cable is used.
0.60 m
0.95 m
3.15 m
3.20 m
1.15 m
1.65 m
1.90 m
2.00 m
0.40 m
0.60 m
2.00 m
2.05 m
0.70 m
1.05 m
1.25 m
1.30 m
Steering