Furuno DRS2D-NXT, Руководство по установке

Страница: 8 / 40

1. INSTALLATION
2
• It is rarely possible to place the radar sensor where a completely clear view in all
directions is available. Thus, you should determine the angular width and relative
bearing of any shadow sectors for their influence on the radar at the first opportunity
after installation.
• The radar sensor should not be operated or stored in any position other than the
proper operational position (upright).
Consideration for selecting a location for installation (multiple radars)
• In case multiple radars are installed on a ship, DO NOT install the DRS2D-NXT/
DRS4D-NXT within the range of beam area emitted from other radar(s). Use the il-
lustration below for reference when selecting a suitable location for installation. The
SSD inside the RS4D-NXT will be damaged if it is within the radar beam emission
area from other radar.
Installation on a sailboat Installation on a powerboat
Typical installation on a sailboat and power boat
Radar sensor Radar sensor Radar sensor
Radar sensor Radar sensor Radar sensor
Rear View
(Rear View) (Rear View)
More than 1 m
Other radar
More than 20°
More than 20°
Suitable location
Locate the radar out of the radar
beam (dark gray) of other radar.
More than 20°
More than 20°