i
SAFETY INSTRUCTIONS
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the equipment.
CAUTION
Ground the equipment to
prevent electrical shock and
mutual interference.
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Do not open the cover
unless totally familiar with
electrical circuits and
service manual.
High voltage exists inside the
equipment, and a residual
charge remains in capacitors
several minutes after the
power is turned off. Improper
handling can result in electri-
cal shock.
Do not install the display unit or
transceiver unit where it may get wet
from rain or water splash.
Water in the equipment can result in fire,
electrical shock or damage the equipment.
The transceiver unit weights 17 kg.
Reinforce the mounting area,
if necessary.
Install the specified transducer tank in
accordance with the installation instru-
ctions. If a different tank is to be
installed the shipyard is solely respon-
sible for its installation, and it should
be installed so the tank doesn't strike
an object.
The tank or hull may be damaged if the
tank strikes an object.
Observe the following compass safe
distances to prevent intereference to a
magnetic compass:
Transceiver unit
Control unit
Monitor unit
Standard
compass
Steering
compass
1.75 m
1.10 m
0.30 m
0.30 m
0.80 m
0.55 m
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
Do not allow warm water or any other
liquid other than seawater or fresh-
water to contact the transducer.
Damage to the transducer may result.
The transducer cable must be handled
carefully, following the guidelines below.
Keep fuels and oils away from the cable.
Locate the cable where it will not be
damaged.
The mounting location must satisfy the
following conditions:
Away from rain and water splash
Out of direct sunlight
Away from air conditioner vents
Away from magnets and magnetic fields
Moderate and stable in temperature
and humidity
Содержание CI-88
