Furuno CI-88, Руководство по установке

Страница: 11 / 83

2. MOUNTING
2-1
2. MOUNTING
2.1 Monitor Unit/Control Unit
Turn off the power at the switchboard before beginning
the installation.
Fire or electrical shock can result if the power is left on.
WARNING
The monitor and control units can be installed as one unit or two separate units. The
optional “separate monitor unit installation kit” is necessary when installing them as
separate units. (See page 2-3 “Mounting the control unit separately.”) Further, these units
can be mounted in a panel (requires optional flush mount kit), together or separately. See
the outline drawings at the back of this manual for details.
•
Locate the units out of direct sunlight and hot air.
•
The operator should face the bow while viewing the display screen.
•
Select a location where the display screen can be easily observed while operating the control
unit.
•
Keep the unit away from the magnetic field.
•
Environmental temperature should be –15 to 55°C.
•
Locate the units at the place with minimal vibration.
•
Select the place well-ventilated.
•
Leave sufficient space around the units for maintenance and servicing. Recommended
maintenance space appears in the outline drawing at the back of this manual.
Desktop mounting
Monitor unit and control unit
1. Fasten the mounting base to the mounting location with four tapping screws (5x20).
Front
Mounting base