Furuno CH-37BB Скачать руководство пользователя страница 62

Страница: 62 / 71

8. MAINTENANCE

8-4

8.6

Train/Tilt Test

This test checks the transducer training and tilting functions for proper operation.

1. Select TRAIN/TILT TEST with [



] or [



] key from the SYSTEM menu.

2. Press the [MENU] key to start the test.
3. Press the [MENU] key to return the SYSTEM menu again.
4. Press the [PWR] key to quit the operation.

8.7

Test Pattern

This test checks display position and colors.

1. Select TEST PATTERN with [



] or [



] keys from the SYSTEM menu.

2. Press the [MENU] key to start the test.

3. Press the [MENU] key to return the SYSTEM menu again.
4. Press the [PWR] key to quit the operation.

This check the photo sensors
which detect the referense angles
for training and tilting operations.

This checks the transducer
training operation. The four digit
figures used to train the
transducer by 180°.
If training is abnormal, NG count
increases by one.

This checks the transducer tilting
operation. If the number of pulses
used to tilt the transducer is
abnormal, NG count increases by one.

This increases by one when
above test has done.

Note: The number of pulses

are reference only.

** TRAIN/TILT TEST **

– PHOTO SENSOR CHECK –

TRAIN TILT

0°

180°

OK
OK

+10°
180°
190°

OK
OK
OK

0 → 180° ( CW)

180 → 0° ( CW)

0 → 180° ( CCW)

180 → 0° ( CCW)

– TRAIN CHECK –

PULSES

1428
1449
1427
1451

0
0
0
0

+10 → 90°

90 → 190°

190 → 90°

90 → +10°

– TILT CHECK –

PULSES

1206

939
919

1225

0
0
0
0

TEST COUNT = 8

EXIT : PRESS MENU KEY

Black

Red

Green

Blue

Position check

[↓]

Содержание CH-37BB








































































Результаты поиска

Содержание CH-37BB

Отзывы:

Бренды по названию

Популярные бренды

Furuno CH-37BB, Руководство оператора

Результаты поиска

Содержание CH-37BB

Отзывы:

Бренды по названию

Популярные бренды